Over the years Krouse Precision Cryogenics have been committed to invest in state of the art machinery, to ensure that customers will benefit from the latest in new technology.

These machines have a top speed of 18,000 RPM, which gives a virtually burr free and exerts much less load on the components, allowing thin webs to be left without distortion.  They also allow high feeds to be used. The maximum contouring feed rate the computer can handle is 12 metres per minute. They are capable of allowing large parts to be milled and drilled and also allowing many smaller parts to be machined at one setting. All conventional milling and drilling in non ferrous and plastics etc. can be carried out on this machine with added advantage of a vacuum table of over 3300 mm x 1600 mm. The 1631 can also machine extrusion up to 9 metres long. Both machines are connected directly to our Cad-Cam system and this allows us to nest parts, in a sheet or plate, to make the best use of material and avoid wastage.

This machine built in Switzerland is a high quality and specification wire eroder capable of cutting almost any material that conduct electricity. The wire is fed between  two precision guides and can be tipped to produce tapers. It also has a strategy to alter the wire setting when cutting to minimise wire breakage and also has an auto rethread facility so left with minimum supervision. The work area of this machine is 850 x 500 x 200 with a maximum part weight of 500Kg.

Choose from the links below or on the side menu for further information on our plant list.

If you prefer you can click here to download a copy of our Plant List in Adobe Acrobat format (pdf).